4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5

4.5" SeaSucker w/ Stainless Steel D-Ring

VM1013W
$99.50 AUD
$59.00 AUD $99.50 AUD
Tax included.
Color: White
Shape: Flat-Top

All the awesomeness of the original 4.5″ SeaSucker, but with a stainless steel D-ring for holding ropes, straps, etc. Our vacuum cups lend themselves to an almost infinite number of uses. If you need to attach something to a rigid, non-porous surface without drilling any holes, this is the best way to do it.

Additional details

Protective covers included.

Size & Specifications
  • Rated to pull up to 120 pounds.
  • All metal parts are high-grade stainless steel (even the springs inside our pump)
  • 4.75” diameter when attached.
  • Choose between black or white.
  • Choose flat-top or pointed d-ring.
FAQs

Q: How strong are the vacuum mounts?

A: “Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.

Q: How long do the vacuum mounts last before they lose power?

A: There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.

Q: Do I need to clean the surface I’m going to attach my SeaSucker to?

A: Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt.

4.5

4.5" SeaSucker w/ Stainless Steel D-Ring

$99.50 AUD
$59.00 AUD $99.50 AUD

Customer Reviews

Based on 66 reviews
97%
(64)
2%
(1)
2%
(1)
0%
(0)
0%
(0)
J
Joey J.
Happy Camper

I primarily purchased these to secure awning straps to the sides of my truck camper and like my other SeaSucker product, a cup holder, they just work! I often use a Slumberjack Road House tarp off the back of my truck camper and used ratchet straps to my truck wheels. This is just a cleaner/easier method.
I had tried some cheaper suction cup mounts and they were always hit or miss. No longer!

M
Mattie G.
Holds well

Holds well. I use it to position my sea anchor while drift fishing. Allows me to position it anywhere along my boat to adjust how she drifts

J
Jim L.
Trolling Motor Stabilizer

No drill and removable when not needed. So far, a perfect solution.
(I tried before but the photo didn't load)

User picture
B
BORGE S.
Best sucker have seen

I have used both sizes. 5 stars to both. My float was attached to a boat for a week while I was out in other state. Came back everything was as left. I was impressed ☝️

A
Andrew S.
Great Dog Tie out

I love the ability to tie out out little Terrier mix anywhere along the side of our RV

123

You may also like