Action Camera Flex Mount
Action Camera Flex Mount
Action Camera Flex Mount

Action Camera Flex Mount

EL5998
$179.00 AUD
$179.00 AUD
Tax included.

Everyone thinks they’re going to catch something special on their camera these days (still waiting on a decent Bigfoot video), but you’ll never get that perfect shot if your GoPro or other action camera isn’t ready and rolling. What better way than to attach it to our Action Camera Flex Mount. Attach it to the car, boat, helicopter, ATV, canoe, or wherever you want since the SeaSucker makes it so easy.

Additional details

What's in the box:

- Tripod adapter to attach GoPro & other action cameras

- Black 7" Flex Arm

- Powerful 120lb pull-strength rated vacuum mount

Size & Specifications
  • Anodized aluminum tripod adapter
  • 4.5" SeaSucker Low Profile Vacuum Mount with two stainless 1/4-20 inserts in the top and side
  • 10" Total Height (flex arm is 7" long and includes 1/4-20 threaded studs on each end)
FAQs

Q: How strong are the vacuum mounts?

A: “Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.

Q: How long do the vacuum mounts last before they lose power?

A: There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.

Q: Do I need to clean the surface I’m going to attach my SeaSucker to?

A: Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt.

Action Camera Flex Mount

Action Camera Flex Mount

$179.00 AUD
$179.00 AUD

Customer Reviews

Based on 20 reviews
75%
(15)
10%
(2)
10%
(2)
0%
(0)
5%
(1)
B
Benjamin F.
Solid and durable

Reliable and Strong hold! Flex arm holds the camera in the same position.

B
Big S.
First impressions…

Tried out the Action Camera Flex Mount for the first time earlier in the week. Had it mounted on the front fender of my Ram 3500 for my GoPro MAX 360 camera while driving the “Million Dollar Highway” from Ouray to Durango in Colorado and it held in place superbly for the 70+ mile trip. My only complaint is that when I pre-installed the vacuum base oriented in position where I believed it would be “square” with the front of the truck, when I screwed in the flex rod so it was tight, the camera would end up pointing slightly off center. This happened if used the fitting on top of or on the side of the base.

T
TJ B.
Broke before even using it

The mount itself is great. The cheap bolt at the end of the arm is junk. First it the thread was wrong and the arm wouldn't sit flush to mount. After fixing that, the arm has play in it making it not secure so if you're trying to manipulate the camera, you only have a little wiggle room. All in all very disappointed it failed and the arm angles weren't flexible enough to stage the right camera shot. So, guess I'll stay with the ole GoPro arms and suction cups :/

P
PAUL N.
Not as I expected.

The post for holding the camera is solid not flexible and therefore loses a lot of usefulness for me. When I bought it I understood it was flexible,so not as I was led to believe.

w
william s coppola c.
Perfect addition to my car

Needed something to mount my GoPro 360 cams and this is perfect for the setup

123

You may also like